Clear all
In pole fishing, the arrangement behind the rig is directly involved in the control of the tackle. Rollers take the pole when pulling it back, the stands keep the prepared topsets in an accessible place, and the tripods provide a separate pivot. The right combination shortens movements between feeding, fish uncoupling and line change, especially when the space around the seat is limited.

For organizing more ready-made lines a practical choice is Topsets comb MAVER - 12 sockets. The model is side-mounted, has twelve positions and is fastened by standard thread to each platform attachment. This allows individual topsets to stand clearly distributed, while the free area in front remains for the kepa, keepnet cane and accessories that are used most often.

See more View less

The roller is selected according to the length of the pole, the direction of withdrawal and the actual space behind the angler. On a flat, open shore, a wider location can be worked, while a narrow section with vegetation requires a more compact scheme. It is important that the pole passes along a natural line, without lateral refraction or touching hard edges.

In the case of topsets, the decisive ones are the number of lines used and the place from which you can get them in one movement. Leave enough distance between the sections, taking into account the floats, aggravations and length of the leaders. If the mounts hang too close to the ground or platform, the risk of being hung up on a fast shift increases.

Tripod is a sensible solution when you don't want the load to stay on the foot or attached to the platform. Lay it on a stable base and check that the pole route does not cross the fishing rods, buckets or the landing net handle. In wind, lower the unnecessarily high supports and orient the tackle so that the movements remain predictable.

Before the start, make one dry sample with the longest section used. This will see if the heights match and if you can put the pole away without twisting the body. After the outing, clean the contact surfaces, inspect the threads and put the supports away only after they are dry. The most common mistake is overcrowding: each stand must have a clear task. Check this one more time after the first shift.

The next check of the working arrangement by the water can go through Float fishing stands, with a focus on the place of each element relative to the current category. Rollers, stands, combs extends the comparison beyond the float, while Float fishing accessories directs to the other accessories in the same fishing set.